DC-101 V2
720P HD DTV CAM
50–950 MHz / 1200–1350 MHz
The DC-101 V2 is a 720P HD DTV CAM that outputs its captured video as a DVB-T digital TV signal, so any DVB-T compliant receiver can watch it over existing coaxial cable or over the air. It encodes H.264 1280x720x30 (or D1 PAL/NTSC) video with AAC mono audio and transmits across 50~950MHz and 1200~1350MHz.
50–950 MHz / 1200–1350 MHz · 2/3/4/5/6/7/8 MHz bandwidth · H.264 1280x720x30 over DVB-T
Datasheet — DC-101 V2
06 · DTV Camera Series
Features
- 01 Painless upgrade to HD — Reuse existing coaxial cable deployment without any special requirement for cable & connector. DVB-T signal is so robust that even a degraded and aged cable can be used to convey HD signal perfectly.
- 02 Easy and friendly user experience — There is no lousy network IP configuration and no need to use a desktop or notebook PC. It's just as easy as watching TV programs with a TV set or SetTopBox.
- 03 Long Distance — Easily transmit HD video over a single 3C2V/RG59 cable for at least 500 meters long without adding any repeater. For wireless applications, the line of sight transmission distance may reach 50~100 meters at 0dBm RF radiation power and up to several kilo meters at 20 dBm. The real distance depends on the antenna design and receiver quality.
- 04 Daisy-Chain Connection (Bus-Topology) — Multiple DTV CAM's with different channel configurations can share a single cable. It can dramatically reduce the cable deployment cost and effort.
- 05 Real time protocol and Low latency — No frame drop in QEF (Quasi-Error-Free) condition, and low transmission latency.
Specifications
General Specifications
- Image Sensor
- OV9712, 1/4” 1.3M CMOS MegaPixel
- Effective Number of Pixels
- 1280(H) * 800(V)
- Video Compression
- Configurable: H.264 1280x720x30, or H.264 720x576x25 (PAL), or H.264 720x480x30 (NTSC)
- Audio Compression
- AAC mono @16KHz sampling rate
- Video Transmission Protocol
- DVB-T
- Auto Gain Control
- AUTO
- White Balance
- AUTO
- Back Light Compensation
- AUTO
- Day & Night
- AUTO
- Scanning System
- Progressive
- S/N Ratio
- 39dB
- Power Supply
- DC 5V
- Power Consumption
- < 2.5W
- Dimension
- 50mm x 50mm x 20mm (box body only, excluding the holder)
- Weight
- 50g (box body only, excluding the holder)
- Operating Temperature
- -10℃ ~ 60℃
DVB-T RF Transmitter Specifications
- RF connector
- 75-Ω BNC connectors
- Bandwidth
- 2/3/45/6/7/8 MHz
- Constellation
- QPSK and 16QAM (In 16QAM mode, only Guard Interval 1/4 supported)
- FFT
- 2K, 8K
- Code rate
- 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval
- 1/4, 1/8, 1/16 or 1/32
- Frequency range
- 50~950MHz, 1200~1350MHz step size 1KHz. All valid TV channels are fully supported — VHF 6M BW/UHF 6M BW: CH7~CH83; VHF 7M BW/UHF 7M BW: CH5~CH69; VHF 8M BW/UHF 8M BW: CH5~CH69
- RF Output Level
- 50~950 MHz: +0 dBm (108 dBuV) Typically; 1200~1350MHz: -20 dBm (88 dBuV) Typically
- Digital Attenuator
- Range: +6/-25dB, Step size 1dB
- MER
- 50~950MHz: 30~35 dB Typically; 1200~1350MHz: 25~30dB Typically
- Spectrum Shoulder (Adjacent channel)
- 45dB
- Phase noise
- <-92dBc @ 10kHz
- Carrier Suppression
- >42dB
- Specifications are subject to change without prior notice.
- There could be MER loss in high gain/attenuation level.
- All the above configurable settings can also be set or configured by a micro SD card.
- 15 preset channels can be easily selected by a rotary switch.
Order information
- DC-101 V2
- Lens: F#: 2.0, TTL: 4.0mm, DFOV: 66° · Housing: Box · Package Weight: TBD
Availability varies by model — current-production gear is in the eBay store, and every page links to its original write-up on the old site. Original product page →
https://hides.com.tw/en/ham/catalog/dc-101/ · +886-2-2917-2417 · info@hides.com.tw